Generic Type High-solids, polyamine cured, modified epoxy phenolic

Description

High solids epoxy lining with exceptional chemical resistance. Primarily as a tank lining, it is
recommended for storage of crude oil (180°F/82°C), demineralized water (150°F/65°C), tap water
(200°F/93°C) food and beverage industries, and water and wastewater exposures. Is excellent as a
protective coating under insulation, operating at (400°F/204°C). Outstanding resistance to wet/dry
cycling conditions at these elevated temperatures.

Features

• High solids; Low VOC formula compliant to current AIM regulations
• Excellent overall chemical resistance to crude-oil & other petroleum products
• Temperature resistance up to 400°F(204°C)
• Excellent abrasion & thermal shock resistance
• Meets the FDA requirements for 21CFR 175.300 for direct food contact
• Passes EI 1541 jet fuel gum test for aviation fuel handling systems
• Complies with MIL-PRF-4556F testing

Color
Gray (0700), White (0800)
Other limited colors may be available on special order. Contact your Carboline Representative for
availability.

Finish Semi-Gloss

Primer Self-priming

Dry Film Thickness

4 – 6 mils (102 – 152 microns) per coat
Two coats are needed for optimum performance. A third coat may be applied for additional
thickness and/or service life. Total system not to exceed 18 mils (457 microns) DFT.

Solids Content By Volume 85% +/- 2%

Theoretical Coverage
Rate
1363 ft2/gal at 1.0 mils (33.5 m2/l at 25 microns)
341 ft2/gal at 4.0 mils (8.4 m2/l at 100 microns)
227 ft2/gal at 6.0 mils (5.6 m2/l at 150 microns)
Allow for loss in mixing and application.

VOC Values

As Supplied : 1.00 lbs/gal (119 g/l)
Thinner 2 : 25 oz/gal: 2.00 lbs./gal (240 g/l)
Thinner 225 E : 13 oz/gal: 0.56 lbs./gal (67 g/l)
Thinner 76 : 25 oz/gal: 1.96 lbs/gal (235 g/l)
These are nominal values and may vary slightly with color.

Dry Temp. Resistance Continuous: 400°F (204°C)
Non-Continuous: 450°F (232°C)

Under Insulation
Resistance

Continuous: 400°F (204°C)
Non-Continuous: 450°F (232°C)

Temperature
Resistance (Immersion)

Immersion temperature resistance depends upon exposure. Consult Carboline Technical Service
for specific information.